#Canon pixam mp160 error 5 how to
#Canon pixam mp160 error 5 install
#Canon pixam mp160 error 5 manual

If the waste ink absorber becomes full, printing will not be possible.

Printing can continue until the waste ink absorber becomes full. Press the or button to clear the error and continue printing.

#Canon pixam mp160 error 5 install

Install each ink cartridge in the proper position. The ink cartridge is not installed in the proper position. The ink cartridge is not installed in the appropriate position. If one of the ink cartridges is missing, this error can occur. Make sure to install ink cartridges even when you set the machine to use only one ink cartridge in printing. The ink cartridge may not be installed properly, or an unsupported ink cartridge may be installed. The ink cartridge(s) cannot be recognized. Printing with an empty ink cartridge may cause the machine to malfunction. Confirm the maximum number of sheets in the auto sheet feeder is within the paper limit mark.Īfter printing completes, replace the empty ink cartridge. Confirm only recommended paper is installed. Confirm there is no foreign material inside the machine.Ģ. If paper jams frequently occur, check the following:ġ. Clean the paper feed roller to resolve the error. Confirm the maximum number of sheets in the auto sheet feeder. When paper is installed, check each of the following items and try printing again.ġ. If paper is not installed, load it and then press the or button. Take the appropriate action to clear the message.Įx. Please contact our support team regarding service.LED Errors When an error occurs, the error displays on the LED. If you have purchased a CarePak Canon extended warranty, you may be entitled to additional options.

Warranty Service – If you are within the 1-year manufacturer’s warranty and have your proof of purchase you are entitled to service or replacement.

There are two options currently available to you. If the steps provided do not resolve this concern, it suggests that your printer requires servicing to resolve this problem.

If the printer still doesn't work correctly, and the carriage is accessible, remove and replace the ink.

Press Power to turn the printer back on, then trying printing again.

Reconnect the data cable (not applicable to Wi-Fi, Bluetooth or Infrared).

If the power cord is plugged in to a surge protector, it may be necessary (for testing purposes) to plug the cord directly into the wall outlet.

Unplug the printer power cord for approximately 10 minutes, and then plug it back in.

Disconnect the data cable from the printer (not applicable to Wi-Fi®, Bluetooth® or Infrared).

Press the Power button to turn off the printer.

Inspect the printer to confirm there is no remaining paper from a paper jam and that there are no foreign objects inside your machine.

Paper is jammed or there is an object inside the printer.

Remove the ink cartridges and reseat them.

On first time setups, ensure any packing material inside the printer has been removed.

Packing material was left inside the printer.

#Canon pixam mp160 error 5 how to

Check the FAQ section under your model for an article on how to clean the encoder (timing) strip if possible.

#Canon pixam mp160 error 5 manual

Manual cleaning can be done on some models.

Encoder (Timing) Strip on the printer needs cleaning.

There are several reasons for Error 5100 to appear, including a paper jam, an improperly seated ink tank, and more.